Custom terrain tile10 or 20 cm3D printed in Australia

Make your
ground.

The course you ran, the lake you raced, the court you played. Printed in 3D as a terrain tile, 10 or 20 cm across, framed or on a desk stand, with your plaque engraved.

Start yours
Upload a run or ride to see it fly in 3D, then keep it
GPX · FIT · TCX · KML · or drop it here
Map a place

No file? Get it from your app, or make a page of a place.

or design a tile straight away

Try one: //

Fig. 01An honour wall · Queenstown to Frankton, 20 cm, nearest
A hallway wall of framed terrain tiles, one person's races over the years: Queenstown to Frankton nearest, its mountains rising out of the black frame above an engraved plaque, then a Lake Burley Griffin regatta, 5-Seenweg in Zermatt in a wood frame and City to Bondi, and an empty space under a picture light for the next one.
Tile
20×20cm
Ground across
6.9km
Scale
1:34,400
Tallest relief
19.0mm
01Famous grounds
Tokyo · London · Chicago · New York · Melbourne · Alpe d’Huez

Real courses,
real heights.

Six grounds, built the way we build yours. The course where it was run, the towers at their measured heights, the mountains in relief.

Sample plaques: the names and times on them are made up.

A 10 cm framed terrain tile of Shinjuku, Tokyo, lying on a light oak sideboard: the skyscrapers around the city hall stand as white blocks, the red route of the Tokyo Marathon start runs east past the station, a park in green on the left, the plaque engraved Kenji Sato, Tokyo Marathon.

Tokyo Marathon

The start, under the Shinjuku towers
Scale
1:12.5k
Heights
PLATEAU
A 10 cm framed terrain tile of the City of London and the Thames on a light oak sideboard: the river in pale blue, Tower Bridge with the red marathon route crossing it, the Tower of London and the City towers behind, the plaque engraved Priya Shah, London Marathon.

London Marathon

Over Tower Bridge at halfway
Scale
1:12.5k
Heights
LiDAR
A 10 cm framed terrain tile of downtown Chicago on a light oak sideboard: the Loop towers in white, Grant Park in green, Lake Michigan in pale blue and the red marathon route along Columbus Drive and through the Loop, the plaque engraved Alex Wong, Chicago Marathon.

Chicago Marathon

Grant Park and the Loop
Scale
1:22.5k
Heights
LiDAR
A 10 cm framed terrain tile of Midtown Manhattan and Central Park on a light oak sideboard: the towers of Midtown in white, the park in green with the red marathon route along its drives to the finish, the plaque engraved Sam Nguyen, New York City Marathon.

New York City Marathon

The last miles, through Central Park
Scale
1:24k
Heights
LiDAR
A 10 cm framed terrain tile of Melbourne on a light oak sideboard: the red loop of the Tan round the green Botanic Gardens, the Yarra in pale blue, the MCG and the Southbank towers behind, the plaque engraved Mia Chen, The Tan.

The Tan, Melbourne

3.8 km round the Botanic Gardens
Scale
1:22k
Heights
Council
A 10 cm framed terrain tile of the Oisans mountains on a light oak sideboard: the valley floor, forested slopes in green and white peaks rising off the tile, the red road of the Alpe d’Huez climb zigzagging up the slope, the plaque engraved Tom Baker, Alpe d’Huez.

Alpe d’Huez

The 21 bends, by bike
Scale
1:100k
Bends
21

Building heights: MLIT Project PLATEAU (CC BY 4.0); Environment Agency LIDAR Composite 2022 (Open Government Licence v3.0); U.S. Geological Survey 3D Elevation Program; City of Melbourne. Maps © OpenStreetMap contributors, Overture Maps Foundation. Terrain Mapterhorn.

02Any ground
Runs · rides · swims · regattas · courts · fields

Every sport
has a ground.

A marathon through the city, a regatta lake, an alpine trail, a cricket ground. If it is on the map, we can print it, with the real hills, water, parks and buildings.

03How it works
About 10 minutes to design

Three steps.

No design skills needed. You see the live 3D tile the whole way through.

  1. 01

    Start with your ground

    Upload a run, ride, swim or sail file, or search any place: a lake, a court, a field, a whole city.

  2. 02

    Size it, frame it, write the plaque

    Pick 10 or 20 cm and one of six ready-made looks, choose a frame or a desk stand and write up to three engraved lines.

  3. 03

    We print and ship

    We print it layer by layer, check it by hand and post it to your door. Your order’s page shows each step and the tracking number.

A 10 cm terrain tile of Queenstown to Frankton in its black frame on a light oak plinth in low afternoon sun, the mountains standing in relief, the red route along the lake and the engraved plaque in front.
04What you get
Two sizes · frame or stand · plaque
Both sizes in one room: a 20 cm framed terrain tile on the wall and a 10 cm one standing on the desk below it.
Fig. 02Both sizes, true scale
10or20cm
square

Two sizes, the same ground. 10 cm stands on a desk or a shelf; 20 cm is made for the wall. Hills, buildings and trees rise with the size, never more than 20 mm; water and parks print in their own colours.

Tile10 × 10 or 20 × 20 cm, printed in up to five colours
Frame or standBlack, white or wood frame: 12 × 13 cm or 23 × 25 cm with the plaque. For the 10 cm tile also a black desk stand.
PlaqueThree engraved lines you write, the letters larger on the 20 cm frame
LooksSix ready-made colour sets, or set each colour yourself
10 cm stands on a desk or shelf
20 cm framed for the wall
05Where it lives
Cabinet · bookshelf · gym · wall

Made to be
looked at.

Keep it with your trophies in the cabinet or on the bookshelf, or hang it on the wall. In step three you turn your own tile in 3D and see each size on a wall at true size before you order.

An oak and glass display cabinet in the afternoon sun: a 10 cm terrain tile of Queenstown to Frankton on its black desk stand with an engraved nameplate, beside a gold cup on two books and a framed 5-Seenweg tile on a small easel.
Cabinet
In the display cabinet 10 cm · desk stand
An oak bookshelf in the afternoon sun: a 10 cm terrain tile on its desk stand at eye level between books, and on the shelf below a silver cup and a framed Lake Burley Griffin tile.
Bookshelf
On the bookshelf 10 cm · desk stand
A 20 cm framed terrain tile on a gym wall.
Gym
On the gym wall 20 cm · framed, to hang
Close up on the bookshelf: the Queenstown to Frankton tile on its desk stand, the red route along the lake under the mountains and the nameplate engraved Jane Citizen, Queenstown to Frankton, 6.8 km, 34:30, 22 Nov 2025.
Up close
Your name on it Three engraved lines
06For organisers
Events · clubs · schools

A tile for every finisher.

One course tile, printed for your whole field. Every finisher gets the ground they raced, with their own name and result engraved on the nameplate.

Talk to us

Every event is different, so we talk it through on a short call.

A

One tile per course

Marathon, half, 10K, the kids' dash: each course gets its own tile in your event's colours.

B

A nameplate for each finisher

Name, time, category and place, engraved from your official results.

C

Finisher result pages

Finishers look up their bib, see their nameplate and order in a minute.

D

We print and ship

One print run after the event, packed and sent to you or to each finisher.

Took part in an event with us? Your result is waiting.

07Questions
Files · sizes · shipping · care

Good to know.

Which files can I upload?

GPX, FIT, TCX or KML, from Strava, Garmin, Apple Watch, Coros, Wahoo or Komoot. On strava.com, open the activity, then the menu, then Export GPX. On connect.garmin.com, open the activity, then the gear icon, then Export to GPX. Other apps, step by step: get your activity file.

No route? Can I just pick a place?

Yes. Search a lake, a park, a sports ground or an address, then drag, zoom and turn the map until the square holds what you want.

Which size should I pick?

10 cm (12 × 13 cm in its frame, or on a desk stand) suits a desk, a shelf or the top of a piano. 20 cm (23 × 25 cm framed) holds its own on a wall. Both show the same ground; on the 20 cm tile streets, trees and hills are twice as large, so there is more to see.

When will it arrive?

We print each tile to order, check it by hand and post it by Australia Post, tracked. You see the delivery cost before you pay; then your order’s page shows each step, and the tracking number once it ships.

How do I pay?

By card on Stripe’s secure payment page when you check out; we never see your card details. Prices are in Australian dollars and include GST, and Stripe emails you the receipt. A download code from us pays for downloads at checkout.

How do I look after it?

Dust it with a soft, dry brush. It is printed in PLA, so keep it out of strong sun and away from heaters.

I took part in an event with you.

Your course tile is ready made: find your result, enter your bib and order with your own nameplate.